Flame Retardant Sheeting

Features & Benefits

• Flame retardant sheeting with third-party LPS1207 certification
• LPCB certificate number 1792a – product certificate 1792a/02
• Supplied as one complete 4m x 25m roll
• Approximately 13.12 feet x 82.02 feet
• Centre-folded down to approximately 2m – 6.56 feet
• 1000 gauge – approximately 250 microns or 0.25mm thick
• Covers approximately 100m² – 1,076.39 square feet
• Manufactured from virgin polymers with specialist flame-retardant additives
• Orange colour provides a highly visible protective covering
• Suitable for draping, screening, hanging and covering
• Tested for ignitability, smoke emissions, toxic gas emissions and critical oxygen index
• Suitable for approved asbestos wrapping and enclosure applications
• Helps protect surfaces and finishes from airborne dust and general debris
• Recommended working temperature range of 5°C to 50°C
• Sold per complete roll
• Available for delivery throughout mainland UK

Common Uses

• Temporary construction-site screening
• Building refurbishment projects
• New construction projects
• Draping and hanging applications
• Covering floors, walls and finished surfaces
• Protecting installed internal finishes
• Separating specific working areas
• Dust and general debris protection
• Covering equipment and machinery
• Creating temporary internal enclosures
• Pallet hoods and protective covers
• Wrapping large asbestos-containing items by trained specialists
• Asbestos tents and enclosure applications
• Protecting suitable substrates near electrical equipment that could produce sparks

Flame Retardant Sheeting 4m x 25m

Our orange flame retardant sheeting provides a certified protective covering for construction, refurbishment and specialist containment applications. Each complete roll measures 4m x 25m, which equals approximately 13.12 feet x 82.02 feet.

The material is manufactured from virgin polymers with specialist additives that provide its flame-retardant properties. Furthermore, the product carries third-party LPS1207 certification under LPCB certificate number 1792a. Certificate number 1792a/02 applies specifically to the orange 4m x 25m x 250-micron product.

The orange colour makes installed sections easy to identify. Meanwhile, the substantial 1000-gauge construction provides a strong protective barrier for demanding indoor environments.

Flame Retardant Sheeting Specifications

Specification	Details
Product type	Flame-retardant polythene protection
Material	Virgin polythene with specialist flame-retardant additives
Colour	Orange
Full open width	4m / approximately 13.12 feet
Centre-folded width	Approximately 2m / 6.56 feet
Roll length	25m / approximately 82.02 feet
Metric dimensions	4m x 25m
Approximate imperial dimensions	13.12 feet x 82.02 feet
Thickness	1000 gauge
Micron thickness	250 microns
Metric thickness	0.25mm
Imperial thickness	Approximately 0.00984 inches / 9.84 mil
Gross coverage	100m² / approximately 1,076.39 square feet
Certification	LPCB certified to LPS1207
General certificate number	1792a
Product certificate number	1792a/02
Recommended temperature range	5°C to 50°C / 41°F to 122°F
Typical softening point	Above 70°C / 158°F
Approved environment	Indoor use only under the LPS1207 certification
Heat-shrinking	Not approved
Selling unit	One complete roll
Delivery area	Mainland UK

The gross coverage uses the complete roll dimensions. Therefore, allow additional material for overlaps, trimming, upstands, obstacles, fixing and installation waste.

Dimensions and thickness are nominal, while imperial conversions are approximate.

Flame Retardant Sheeting Certification

This flame retardant sheeting is LPCB certified to LPS1207 Loss Prevention Standard under certificate number 1792a. The product-specific certificate reference for the orange 4m x 25m x 250-micron roll is 1792a/02.

LPS1207 certification supports projects where insurers, developers, owners or main contractors require flame-retardant temporary protection that complies with LPS1207 and the Joint Code of Practice.

The material has undergone testing for:

Test property	Test method	Data-sheet result
Ignitability	BS 476 Part 12	Pass
Smoke emissions	prEN 2824 and prEN 2825	Pass
Toxic gas emissions	prEN 2824 and prEN 2826	Pass
Critical oxygen index	BS 2782 Part 1	Pass

The certification applies to the product when used and installed according to the relevant instructions. Consequently, altering the material through unsuitable processes or using it outside the certified conditions may invalidate its certification.

Flame Retardant Does Not Mean Fireproof

Although the material offers certified flame-retardant performance, it is not fireproof. Therefore, it cannot eliminate the risk of fire or replace an appropriate site fire-safety plan.

The sheeting helps reduce fire loading and the risk of ignition compared with unsuitable standard polythene protection. However, users must still follow suitable fire-prevention procedures, workplace controls and project-specific risk assessments.

Do not use the material as a structural fire barrier, permanent fire curtain or replacement for an approved fire-protection system. Furthermore, keep it away from direct flames and temperatures outside its recommended working range.

Centre-Folded Flame Retardant Sheeting

The material opens to a full width of 4m, or approximately 13.12 feet. However, it comes centre-folded down to approximately 2m, or 6.56 feet, on the roll.

This format makes the roll easier to store, carry and position before installation. First, place the roll close to the area requiring protection. Next, unroll the required length while the material remains folded. Then, carefully open the centre fold to reveal the complete 4m width.

The fold does not reduce the product’s full dimensions or coverage. Nevertheless, creases and fold lines may remain visible after opening.

Using Flame Retardant Sheeting for Surface Protection

Construction and refurbishment teams can use flame retardant sheeting to protect floors, walls and installed finishes from airborne dust, general debris and damage caused by following trades.

Modern construction programmes often require contractors to install finished surfaces while other work continues nearby. Therefore, covering these surfaces can help reduce cleaning, repair work and delays before project handover.

Before installation, make sure the surface is smooth and free from sharp protrusions. Exposed fixings, rough edges and loose building materials may puncture or tear the sheet.

Flame Retardant Sheeting for Screening

The large roll format suits temporary screening, hanging and draping applications. For example, users can separate working areas, create temporary internal screens or protect specific zones during construction and refurbishment.

Support the sheeting at appropriate intervals and use fixings suitable for the installation. Additionally, prevent loose material from blocking fire exits, access routes, signs, alarms, sprinklers or other fire-safety equipment.

This product can provide a protective screen, but it does not function as structural guarding, edge protection or a load-bearing barrier.

Installing Flame Retardant Sheeting

Install the material with the printed LPS logo facing upwards or outwards so the certification markings remain visible.

Unroll the sheet and cut it to fit the area requiring protection. Where two sections meet, create a minimum overlap of 75mm, which equals approximately 2.95 inches.

Secure the joints firmly with a suitable single-sided tape. Then press along the complete length of each taped joint to produce a secure connection.

For certified or specification-led work, check whether the project requires a particular compatible tape, fixing system or installation arrangement before beginning.

Cutting and Resizing Flame Retardant Sheeting

The material is easy to cut and resize for protective covers, pallet hoods, temporary enclosures and irregularly shaped areas.

First, measure the required section and include enough material for overlaps and fixing. Next, place the sheet on a safe cutting surface. Then use a suitable safety knife or sheeting cutter.

Avoid cutting directly against finished floors, worktops or other valuable surfaces. Furthermore, keep the material away from sharp corners while positioning it.

Cutting the material to size is permitted for normal installation. However, heat-shrinking is not approved and will invalidate the product’s certification.

Flame Retardant Sheeting for Asbestos Applications

The technical data sheet identifies the 250-micron – 1000-gauge – material as approved for use as an asbestos wrapping film. It may also be suitable for wrapping large asbestos-containing items and for asbestos tent or enclosure applications.

However, asbestos work presents serious health risks and remains subject to strict legal controls. Therefore, only appropriately trained and authorised professionals should select and use the material for asbestos-related work.

The sheeting alone does not create a complete asbestos-containment system. Users must follow the relevant risk assessment, method statement, regulations and disposal procedures. In addition, confirm that the complete enclosure, tape, fixings and working practices meet the requirements of the specific project.

Temperature Range

The recommended working temperature for the flame retardant sheeting is between 5°C and 50°C, which equals approximately 41°F to 122°F.

The typical softening point is above 70°C, or approximately 158°F. Nevertheless, the softening-point figure does not represent a safe continuous working temperature.

Do not place the sheet against hot equipment, heating appliances or surfaces that may exceed the recommended range. Additionally, do not heat the product in an attempt to shrink it around an item.

Indoor Use Only

The LPS1207 certification specifies this product for indoor use only. Therefore, do not rely on the certification for an outdoor installation.

Sunlight, wind, rain and changing temperatures may affect the material and its fixings. Furthermore, the technical information does not confirm long-term UV stability or certified outdoor performance.

Choose a product specifically designed and certified for outdoor use when the project involves external screening or prolonged weather exposure.

Moisture Resistance

The polythene material can help protect suitable surfaces from moisture and light splashes. However, joints, edges, punctures and fixing points may allow water to pass around the protective covering.

Overlapping and taping the sheeting does not automatically create a certified waterproof system. Therefore, assess the complete installation when protecting moisture-sensitive materials or equipment.

Non-breathable polythene can also trap condensation. Accordingly, consider ventilation and make sure covered items are suitably dry before enclosing them for extended periods.

Calculating Flame Retardant Sheeting Requirements

Each complete roll provides a gross coverage area of 100m², or approximately 1,076.39 square feet.

To estimate the quantity required:

1. Measure the length and width or height of each area.
2. Multiply the measurements to calculate the area.
3. Add the separate areas together.
4. Include material for the minimum 75mm overlaps.
5. Add an allowance for trimming, corners, fixing and potential damage.
6. Divide the adjusted total by 100m².
7. Round up to the next complete roll.

Complex enclosures, numerous corners and irregular surfaces generally require a larger installation allowance.

Handling Flame Retardant Sheeting

Handle the product in accordance with current manual-handling requirements. Although centre-folding reduces the roll width, the complete roll may remain heavy or awkward to carry.

Position the roll near the installation area before removing all packaging. Additionally, ask for assistance or use suitable handling equipment where necessary.

Avoid dragging the material across rough surfaces because abrasion may damage it before installation.

Storing Flame Retardant Sheeting

Store the roll horizontally in a warm, dry and clean environment. Keep it under cover in its original packaging and away from sunlight.

Furthermore, protect the roll from sharp objects, excessive heat, moisture and contamination. Before installation, inspect the material for punctures, cuts or other damage.

Correct storage helps preserve the material’s condition and keeps the printed certification markings visible.

Important Limitations

• Flame retardant does not mean fireproof.
• This product is certified for indoor use only.
• Do not heat-shrink the material because this will invalidate its certification.
• Use the printed LPS logo side facing upwards or outwards.
• Provide a minimum overlap of 75mm – approximately 2.95 inches.
• Secure joints firmly with suitable single-sided tape.
• Use the material between 5°C and 50°C – 41°F and 122°F.
• Do not use it as a structural or load-bearing barrier.
• Do not obstruct fire exits or fire-safety equipment.
• Only trained and authorised professionals should use it for asbestos work.
• Check project specifications and certification requirements before installation.
• Consult the relevant safety data sheet for health and safety information.

Alternative Names

Customers may also search for:

• Orange flame-retardant polythene
• LPS1207 polythene
• Fire-retardant polythene sheeting
• Flame-retardant protection film
• Construction protection sheeting
• Temporary screening film
• Asbestos wrapping film
• 1000-gauge orange polythene
• 250-micron flame-retardant sheeting
• LPCB-certified protective sheeting

The term fire retardant is commonly used when searching for this type of product. However, the material remains flame retardant rather than fireproof.

Food Safety Information

We have not confirmed this product as suitable for direct food contact. Therefore, do not place it directly against exposed food or use it as food packaging unless appropriate compliance documentation confirms suitability for the intended application.

PPWR Compliance Information

The EU Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, establishes requirements for packaging placed on the EU market. Further information appears in the European Commission’s packaging guidance.

If you use this sheeting as part of a packaging arrangement, assess the complete packaging format and any obligations relevant to its materials, intended use and market.

This description does not constitute a declaration of PPWR compliance. Please contact us for available product information if you need to assess a specific packaging application.

Sample Requests

A small sample patch can help you inspect the colour, thickness, flexibility and printed certification markings before purchasing a complete roll.

For roll products, we provide small sample patches where available. Please contact us to discuss your requirements:

• Email: sales@expresspackaging.co.uk
• Telephone: 0121 622 2347

A sample provides a general indication of the material. However, it cannot demonstrate the performance of a complete installed system.

Delivery

We can deliver flame retardant sheeting throughout mainland UK. The product is supplied as one complete 4m x 25m roll, centre-folded down to approximately 2m wide.

Please contact us if you need to confirm certification, availability or suitability before ordering.

Illustration Only

Product photographs are for illustration purposes. Tapes, fixings, tools, equipment and other accessories are not included unless the product listing states otherwise.

Colour, finish, printing, folding, packaging and roll appearance may vary slightly. Additionally, photography, lighting and screen settings can affect how the orange colour appears.

Dimensions and thickness are nominal, while imperial conversions are approximate. Always allow additional material for overlaps, fixing, trimming and waste.