Market Stall Grips

Features & Benefits

• Market Stall Grips measure 6 inches from the nose to the end of the handles
• Approximately 152.4mm long
• Open to approximately 2 inches / 50.8mm wide
• Galvanised steel construction provides a durable metal grip
• Rust-resistant finish suits regular indoor and outdoor use
• Heavy-duty coil spring creates a strong clamping action
• Integrated handles make the grips straightforward to open and position
• Reusable design allows repeated use when correctly maintained
• Useful for holding tarpaulins, covers and suitable materials in place
• Suitable for market stalls, workshops, gardens and general-purpose applications
• Compact size makes the grips easy to store and transport
• Sold individually
• Available for delivery throughout mainland UK

Common Uses

• Securing market stall covers
• Holding tarpaulins against suitable stall frames
• Attaching temporary side covers
• Holding suitable sheets in position
• Market trading equipment
• Outdoor display areas
• Craft and work tables
• Temporary displays
• Garden covers
• Workshops
• Garages
• Warehouses
• Event equipment
• Holding lightweight materials during suitable tasks
• General-purpose clamping
• Keeping fabric or sheeting positioned while adjustments take place
• Temporary non-structural fixing applications

Market Stall Grips

Our Market Stall Grips provide a strong, reusable method for holding suitable covers, tarpaulins and other materials in position. Each grip combines galvanised steel construction with an integrated heavy-duty coil spring.

The spring-loaded mechanism creates the clamping pressure, while the two handles allow users to open and position the grip. Consequently, the product suits market traders, event organisers, workshops, gardeners and other users who need a practical temporary fixing.

Each grip measures 6 inches from its nose to the end of the handles. This equals approximately 152.4mm. Additionally, the jaws open to approximately 2 inches, or 50.8mm.

We sell each Market Stall Grip individually. Therefore, customers can order the quantity required for their particular stall, cover or project.

Market Stall Grips Specifications

Specification	Details
Product type	Spring-loaded metal grip
Keyphrase	Market Stall Grips
Material	Galvanised steel
Overall length	152.4mm / 6 inches
Measurement points	Nose to the end of the handles
Approximate maximum opening	50.8mm / 2 inches
Closing mechanism	Integrated heavy-duty coil spring
Finish	Galvanised
Rust resistance	Yes – rust-resistant construction
Colour	Metallic
Adhesive	None
Reusable	Yes – subject to condition and correct use
Load rating	Not specified
Main purpose	Holding suitable objects and materials in position
Typical applications	Market stalls, covers, tarpaulins and general clamping
Stock code	549
Selling unit	One individual grip
Delivery area	Mainland UK

Dimensions are nominal, while metric conversions are approximate. The actual opening achieved may depend on the thickness, shape and positioning of the material.

Using Market Stall Grips

Market Stall Grips operate through a spring-loaded clamping action. Squeezing the handles together opens the jaws. Releasing the handles then allows the heavy-duty coil spring to close the jaws around the suitable material or structure.

To use a grip:

1. Inspect the grip before use.
2. Identify a suitable fixing position.
3. Hold the grip securely by its handles.
4. Squeeze the handles together to open the jaws.
5. Position the jaws around the intended materials.
6. Release the handles carefully.
7. Check that the grip sits securely.
8. Repeat with additional grips where required.
9. Inspect the complete arrangement before leaving it unattended.

Keep fingers away from the jaws while releasing the handles. The spring creates a strong closing action and could pinch skin.

Market Stall Grips for Tarpaulins

These grips can help hold suitable tarpaulins and covers against compatible stall frames or supports.

First, position the tarpaulin correctly across the frame. Next, fold or gather the edge where necessary. Finally, attach the grips at suitable intervals around the material.

Using several grips can spread the holding points across the cover. However, the correct quantity and spacing will depend on the tarpaulin size, material, frame arrangement and environmental conditions.

Do not assume that a grip makes a stall, tarpaulin or temporary structure safe in strong wind. Market stalls and covers require appropriate anchoring, weighting and assembly in accordance with the equipment instructions and site requirements.

Galvanised Steel Market Stall Grips

The grips use galvanised steel. This metal construction provides durability for repeated general-purpose clamping tasks.

Galvanising also creates a rust-resistant finish. Consequently, the grips suit many indoor and outdoor applications when correctly used, cleaned and stored.

However, rust-resistant does not mean completely corrosion-proof. Prolonged exposure to rain, salt, chemicals, damp storage or damaged surface coating may eventually affect the metal.

After outdoor use, wipe away water, dirt and other contaminants. Then allow the grips to dry before placing them into storage.

Spring-Loaded Market Stall Grips

Each grip features an integrated heavy-duty coil spring. The spring supplies the closing force that holds suitable materials between the jaws.

This mechanism makes the grips quick to position and remove without screws, adhesives or specialist installation equipment.

Nevertheless, the clamping performance depends on:

• The condition of the spring
• The condition of the jaws
• The material thickness
• The shape of the fixing surface
• The available contact area
• The position of the grip
• Movement or vibration
• Wind and weather conditions
• The number of grips used

No clamping force or load rating has been specified for this product. Therefore, users should assess each application and avoid relying on the grips for safety-critical or load-bearing purposes.

Market Stall Grips Size

Each grip measures approximately 152.4mm / 6 inches from the nose to the end of the handles.

The jaws open to approximately 50.8mm / 2 inches. This opening allows the grip to fit around many suitable combinations of covers, fabrics and compatible frame sections.

However, the 2-inch measurement describes the approximate opening rather than a guaranteed gripping capacity for every material. A thick, rounded or irregular object may reduce the contact between the jaws.

Measure the intended fixing area before ordering. Additionally, confirm that the jaws can close sufficiently to grip the materials securely.

Choosing the Number of Market Stall Grips

The number of grips required will depend on the size and arrangement of the material.

A small cover may require fewer fixing points, while a larger tarpaulin will generally need more grips distributed around its edges. Closely spaced grips may also help spread the holding points more evenly.

Consider:

• The length and width of the cover
• The shape of the supporting frame
• The thickness of the materials
• The available fixing positions
• The weight of the material
• The possibility of movement
• Whether the application is indoors or outdoors
• Expected wind and weather
• How long the grips will remain in position
• Whether people will pass close to the installation

Because we sell the grips individually, customers can select the quantity that best suits their particular arrangement.

Positioning Market Stall Grips

Place each grip where both jaws can make secure contact with the intended materials.

Avoid positioning a grip on an unstable edge or where only the tip of one jaw touches the surface. Instead, use as much suitable jaw contact as the arrangement allows.

The grips should not create sharp folds or excessive pressure on delicate material. If the cover could tear, consider folding the material or adding a suitable protective layer at the gripping point.

Position the handles so they do not create an obstruction or snagging point. Furthermore, keep them away from areas where customers, children, clothing or equipment may catch against them.

Market Stall Grips for Temporary Displays

Market traders and event organisers can use the grips for suitable temporary display arrangements.

Possible applications include holding:

• Lightweight covers
• Decorative fabrics
• Suitable banners
• Temporary side sheets
• Table coverings
• Protective sheets
• Display materials
• Lightweight screening

However, users should assess whether the material could catch the wind or create additional force on the grips and supporting structure.

Do not use these grips as the only means of securing a large banner, sail-like cover or temporary structure. Instead, use appropriate purpose-designed fixings, anchors and supports where the installation requires them.

Opening and Removing Market Stall Grips

To remove a grip, support the surrounding material before squeezing the handles.

Open the jaws carefully and lift the grip away from the fixing point. Then release the handles slowly rather than allowing the jaws to snap together.

If the grip holds a tensioned cover, reduce the tension where possible before removal. Otherwise, the material could move suddenly when the grip releases.

Remove grips one at a time while monitoring the stability of the remaining arrangement. This is particularly important when the grips form part of a larger temporary cover.

Avoiding Damage to Covers

The metal jaws and spring pressure may mark, crease or damage delicate materials.

Before using the grips on a valuable, decorative or easily marked surface, test one in an inconspicuous area. A protective layer between the jaw and material may reduce marking, although it could also affect grip.

Avoid attaching the grips over:

• Sharp folds
• Existing tears
• Worn edges
• Eyelets that could deform
• Brittle plastic
• Thin unsupported film
• Printed areas that could mark
• Electrical cables
• Inflatable materials
• Surfaces that could crush under pressure

The grips provide clamping pressure rather than padding. Therefore, assess the surface before use.

Inspecting Market Stall Grips

Inspect each grip before positioning it.

Check for:

• A weakened or damaged spring
• Distorted handles
• Bent jaws
• Sharp edges
• Cracks
• Heavy corrosion
• Loose components
• Contamination
• Damage to the galvanised finish
• Restricted movement
• A grip that fails to close correctly

Do not use a damaged grip. A distorted jaw or weakened spring may prevent secure and even clamping.

Also inspect grips during prolonged use, particularly after strong wind, movement or an impact to the stall or cover.

Market Stall Grips and Outdoor Use

The galvanised steel construction provides rust resistance for suitable outdoor applications. However, users should still protect the grips from prolonged exposure to harsh conditions.

Rainwater, dirt, salt and chemicals can collect around the coil spring and moving parts. Consequently, regular cleaning and drying can help maintain the grips.

Outdoor conditions can also place changing forces on covers. Wind may pull, lift or repeatedly move the material, which can loosen a temporary fixing or tear the cover.

Check outdoor arrangements regularly. Furthermore, remove or reinforce covers when weather conditions exceed the safe limits of the stall, frame or fixing system.

Cleaning Market Stall Grips

Remove loose dirt with a dry cloth or soft brush.

Where necessary, wipe the grip with a damp cloth and a mild cleaning solution. Then dry it thoroughly, paying particular attention to the coil spring and areas where moisture could remain trapped.

Do not use aggressive chemicals unless their compatibility with galvanised steel has been confirmed.

Avoid leaving grips submerged in water. Additionally, do not store them while wet or covered in mud, salt or chemical residue.

Storing Market Stall Grips

Store the grips in a clean, dry and well-ventilated place.

A box, container or equipment bag can keep the grips together between market days or events. However, make sure the grips are dry before closing the container.

Keep them away from:

• Persistent moisture
• Corrosive chemicals
• Salt
• Excessive heat
• Open flames
• Electrical equipment
• Food
• Children’s play areas
• Delicate products that the metal could scratch

Count the grips after dismantling a stall so none remain attached to covers or left on the ground.

Market Stall Grips Safety Information

The coil spring creates a strong closing action. Therefore, users should keep their fingers, skin, loose clothing and hair away from the jaws.

Wear appropriate gloves where the task or workplace assessment requires them. Additionally, check that the grip has no sharp edges before handling it.

These grips should not be used for:

• Lifting loads
• Suspending products overhead
• Supporting people
• Climbing
• Fall protection
• Vehicle load restraint
• Securing safety barriers
• Electrical connections
• Structural construction
• Child safety applications
• Holding pressurised equipment
• Any application that requires a certified load rating

No maximum load, safe working load or tested clamping force has been specified. Consequently, use the grips only for suitable temporary, non-load-bearing applications.

Important Limitations

Market Stall Grips provide a convenient temporary clamping method. However, their suitability depends on the complete application.

They do not replace:

• Proper stall weights
• Ground anchors
• Structural fixings
• Guy ropes
• Ratchet straps
• Purpose-designed tarpaulin fasteners
• Certified load-restraint equipment
• Weather monitoring
• Safe stall assembly
• Regular inspections

Users remain responsible for ensuring that the stall, frame, tarpaulin and complete fixing arrangement remain safe and suitable.

Also Known As

Customers may also describe this product as:

• Metal stall grips
• Market stall clips
• Metal market clips
• Tarpaulin grips
• Tarpaulin clips
• Spring-loaded stall clips
• Galvanised steel clamps
• Market cover clips
• Stall sheet grips
• Stall canopy clips
• Spring clamps
• Metal spring clips
• Cover grips
• Temporary sheet clamps
• Market trader clips

These terms may describe products with different dimensions, materials, spring strengths and openings. Therefore, check the complete specification before ordering.

Food Safety Information

We have not confirmed the grips as suitable for direct food contact.

Market traders displaying or selling food should keep the grips away from exposed products and food-contact surfaces. Food should remain inside suitable packaging or protected display equipment.

Clean hands after handling outdoor stall equipment and before touching exposed food.

PPWR Compliance Information

The EU Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, establishes requirements for packaging placed on the EU market. Further information appears in the European Commission’s packaging guidance.

Market Stall Grips function as reusable clamping accessories rather than conventional packaging. However, businesses supplying them into the EU should assess any packaging used to contain, protect or distribute the product.

This description does not constitute a declaration of PPWR compliance. Please contact us if you require available product or packaging information for a particular application.

Sample Requests

We may provide an individual grip sample where available so you can assess its dimensions, opening and general construction before placing a larger order.

A sample does not confirm suitability for a specific structure, weather condition or safety-critical application.

To discuss sample availability, please contact us:

• Email: sales@expresspackaging.co.uk
• Telephone: 0121 622 2347

Market Stall Grips Delivery

We can deliver Market Stall Grips throughout mainland UK.

Each grip measures approximately 152.4mm / 6 inches long and opens to approximately 50.8mm / 2 inches. We sell the grips individually, allowing customers to order the quantity required.

Market Stall Grips Illustration Only

Product photographs are for illustration purposes. Market stalls, tarpaulins, covers, frames and other accessories are not included unless the listing states otherwise.

The metallic appearance, galvanised finish and minor construction details may vary slightly between manufacturing batches. Additionally, lighting, photography and screen settings can affect the displayed appearance.

Dimensions are nominal, while metric conversions are approximate. The written specification should guide your purchase.