Clear Recycled Content Sacks

Features & Benefits

• Clear Recycled Content Sacks manufactured from recycled, regranulated polythene
• Translucent appearance allows partial visibility of the contents
• Not completely or crystal clear because of the regranulated material
• Colour, clarity and finish may vary slightly between production batches
• 140-gauge material thickness
• Approximately 35 microns thick
• Suitable for light to medium-duty general waste
• Helps users separate, identify and inspect collected materials
• Gusseted construction provides additional internal capacity
• Open-top design allows quick and straightforward filling
• Flexible material adapts around soft and irregularly shaped waste
• Suitable for recycling, housekeeping and general refuse applications
• Useful where opaque black sacks are unsuitable
• Compatible with appropriately sized bins and sack holders
• Measures 450mm x 730mm x 975mm
• Approximately 17.7 x 28.7 x 38.4 inches
• Supplied in boxes of 100 sacks

Common Uses

Our Clear Recycled Content Sacks are suitable for collecting and separating:

• General office waste
• Paper and cardboard
• Dry recyclable materials
• Empty product packaging
• Soft plastic wrapping
• Retail waste
• Warehouse waste
• Housekeeping waste
• Hotel-room rubbish
• Light catering waste
• Washroom waste
• Classroom and educational waste
• Exhibition and event rubbish
• Cleaning cloths and disposable wipes
• Packaging offcuts
• Empty wrappers and containers
• Light manufacturing waste
• General commercial refuse

However, always check that your waste contractor accepts the chosen material in these sacks before using them for recycling.

Clear Recycled Content Sacks

Our Clear Recycled Content Sacks provide a practical solution for collecting, separating and identifying general waste or recyclable materials.

Unlike opaque black refuse sacks, their translucent appearance allows users to see or partially identify the contents without opening the bag. Consequently, they can help businesses monitor waste streams, reduce accidental mixing and check that unsuitable items have not entered a recycling collection.

These sacks are manufactured from recycled, regranulated polythene. Therefore, they are not completely transparent or crystal clear. Instead, the material may have a slightly cloudy, hazy or tinted appearance.

Small variations in colour, clarity and surface finish are normal characteristics of regranulated material. As a result, one production batch may appear slightly clearer, cloudier or darker than another.

The sacks combine a 140-gauge / approximately 35-micron material thickness with a gusseted construction. Therefore, they provide useful capacity for everyday light to medium-duty waste while remaining flexible and economical.

Each box contains 100 Clear Recycled Content Sacks.

Clear Recycled Content Sack Size and Specification

The product specification is:

• Metric size: 450mm x 730mm x 975mm
• Approximate imperial size: 17.7 x 28.7 x 38.4 inches
• Measurement order: face width x total open width x height
• Thickness: 140 gauge
• Approximate thickness: 35 microns
• Material: recycled/regranulated polythene
• Appearance: translucent rather than completely clear
• Duty: light to medium duty
• Box quantity: 100 sacks
• Product code: 362

Please use the millimetre measurements when you require the closest match to the product specification. The imperial measurements are approximate conversions and have been rounded to one decimal place.

Understanding the Measurements

The 450mm / approximately 17.7-inch measurement represents the face width of the sack while it lies flat.

The 730mm / approximately 28.7-inch measurement represents the total open width, including the material folded into the side gussets. Consequently, the sack expands beyond its flat face width when opened.

The 975mm / approximately 38.4-inch measurement represents the overall height from the sealed bottom to the open top.

Because some of the total open width forms the gussets, the sack will not necessarily accommodate a rigid object measuring the complete 730mm width. Furthermore, bulky contents will use part of the available width and height as the material expands around them.

Therefore, always allow additional clearance rather than choosing a sack that only just matches the measurements of your bin or intended contents.

Not Completely Clear Because of the Recycled Material

Although we describe this product as a Clear Recycled Content Sack, it will not have the crystal-clear appearance of a sack manufactured from completely clear virgin polythene.

The sacks use recycled, regranulated material. During recycling, suitable polythene is processed and converted into granules that can be used to manufacture new film. However, the resulting material may retain slight variations in colour, tone and clarity.

Consequently, the sacks may appear:

• Translucent
• Slightly cloudy
• Lightly tinted
• Hazy
• Less transparent than virgin clear polythene
• Slightly different between production batches

These characteristics do not necessarily indicate a manufacturing defect. Instead, they reflect the use of regranulated polythene.

The contents should remain partly visible through the material. Nevertheless, fine details, printed labels and colours may not appear as clearly as they would through crystal-clear packaging.

Therefore, if you require high optical clarity for product presentation, detailed inspection or photographic purposes, these sacks may not be suitable.

Recycled and Regranulated Polythene Construction of Clear Recycled Content Sacks

Regranulated polythene provides manufacturers with a way to use suitable recovered plastic material in new products.

The source material is processed, cleaned and converted into reusable granules. These granules are then used to manufacture the polythene film for the sacks.

As a result, the appearance can differ from film manufactured entirely from virgin polymer. For example, small variations in shade, transparency and surface texture may remain visible.

The exact composition and recycled content may vary according to the material specification and production batch. Therefore, do not assume that the sacks contain a particular recycled percentage unless the supporting documentation confirms it.

If you require confirmation of the material composition or recycled content, please email sales@expresspackaging.co.uk before ordering or making an environmental claim.

140 Gauge / 35-Micron Thickness

These sacks use 140-gauge polythene, which is approximately 35 microns thick.

This specification provides a practical balance between flexibility, capacity and everyday performance. Consequently, the sacks suit many light to medium-duty waste and recycling applications.

However, gauge describes the approximate material thickness rather than a guaranteed carrying capacity. The amount each sack can safely contain also depends on:

• The type and formulation of the recycled polythene
• Bottom-seam construction
• Weight of the contents
• Distribution of the waste
• Presence of sharp or abrasive edges
• Temperature of the contents
• Handling method
• Distance carried
• Condition of the sack

Therefore, do not rely on gauge alone when determining suitability. A bulky item may fit inside the sack while still being too heavy, rigid or sharp for the material.

Gusseted Construction

The sack includes folded material that remains within the sides while the bag lies flat. However, when the sack opens, these gussets expand and provide additional internal capacity.

Consequently, the bag can adapt around soft, bulky and irregularly shaped waste more effectively than a completely flat sack.

Before fitting the sack to a bin, open the sides carefully and make sure the gussets have separated correctly. Otherwise, an unopened fold may prevent the bag from expanding fully.

Although the gussets provide additional capacity, they do not protect the sack from exposed sharp objects. Therefore, wrap or separately contain pointed items before disposal.

Suitable Waste and Recycling Applications

Clear or translucent sacks can help businesses identify and monitor their waste more easily than opaque alternatives.

For example, cleaning teams can see whether a sack contains paper, packaging or mixed general rubbish before moving it to the correct collection point. Similarly, waste contractors may find it easier to inspect visible contents for contamination.

These sacks may suit collections for:

• Clean paper
• Lightweight cardboard
• Dry packaging
• Soft plastics where accepted
• General office rubbish
• Retail waste
• Housekeeping waste
• Light warehouse waste
• Non-hazardous commercial refuse

However, a clear or translucent sack does not automatically make the contents recyclable. The suitability of the waste depends on the materials inside and the requirements of the chosen recycling service.

Therefore, always check your waste contractor’s rules before introducing these sacks into a recycling system.

Waste These Sacks Should Not Contain

Do not use these sacks for:

• Broken glass
• Unprotected sharp metal
• Exposed blades or needles
• Rubble and building materials
• Bricks, tiles or concrete
• Large quantities of soil or gravel
• Hot ashes or embers
• Hot cooking equipment
• Large quantities of liquid
• Solvents or corrosive chemicals
• Clinical or infectious waste
• Hazardous substances
• Batteries requiring separate disposal
• Electrical equipment
• Waste requiring a colour-coded or regulated sack

Sharp, hot, clinical or hazardous waste requires suitable specialist containers and disposal procedures.

Furthermore, never place liquids or leaking containers into the sacks, as the open top does not create a watertight seal.

How to Choose the Correct Sack Size

Measure the external width, depth and height of the bin before selecting a sack.

For a round bin, measure across the widest part and consider the complete circumference of the opening. For a rectangular bin, measure both the width and depth so that the sack can extend around every side.

Additionally, allow enough material to fold over the bin rim. This extra material helps hold the sack in position and makes removal easier.

The sack should also reach the bottom of the bin without being stretched. However, excessive material at the base can become trapped beneath the contents and make removal more difficult.

Because the sack measures 450mm across its flat face and 730mm across its total open width, the gussets provide part of the usable capacity. Therefore, do not treat the 730mm measurement as the width of one completely flat panel.

If your bin dimensions are close to the stated sack measurements, request a sample before ordering multiple boxes.

How to Fit Clear Recycled Content Sacks

First, remove one sack from the box and locate the open end. Next, separate the sides carefully without pulling sharply against the seams.

Open the gussets fully and lower the sack into the empty bin. Then, guide the sealed base towards the bottom without stretching or puncturing the material.

Fold the open edge over the bin rim while keeping the sack evenly positioned. If necessary, use a compatible sack-retaining band or bin system to hold it securely.

Before adding waste, make sure the bag is not caught on sharp edges, damaged fittings or rough surfaces. Additionally, avoid stretching the sack too tightly across the opening, as this may place unnecessary pressure on the material and seams.

Filling the Sack Safely

Add suitable waste gradually and distribute it as evenly as possible.

Avoid dropping rigid or heavy objects directly into the sack, particularly from a height. The impact may damage the bottom seam even when the object does not have a sharp edge.

Furthermore, do not compress the contents using your hands or feet. Hidden sharp items may cause injury, while excessive pressure can puncture the polythene.

Stop filling before the waste reaches the top edge. This leaves enough material for gathering, closing and handling the sack.

If the contents become heavier than expected, remove some of the waste or divide it between two sacks. Additionally, never drag a filled sack across a rough floor, as abrasion may damage the material.

Closing and Removing the Clear Recycled Content Sacks

When the sack is ready for removal, gather the open top carefully. Then, close it using a suitable sack tie, cable tie or knot where enough material remains.

These sacks do not include an integral drawstring or adhesive closure. Therefore, separate ties must be purchased if required.

Lift the sack carefully and support the base when the contents are bulky or moderately heavy. Do not rely entirely on the gathered top when moving a filled bag.

Moreover, avoid dragging the sack over concrete, rough flooring or external surfaces. Finally, place it into the waste or recycling stream designated by your organisation or waste contractor.

Visibility for Waste Separation

The translucent appearance allows partial inspection of the contents. Consequently, the sacks can help businesses identify contamination before waste enters a recycling collection. For example, staff may be able to spot food waste inside a paper collection or identify general rubbish mixed with recyclable packaging.

This visibility can support internal waste-management procedures. However, it does not guarantee that the waste contractor will accept the sack or its contents. Some services require specific sack colours, printed markings or completely transparent bags. Therefore, confirm the requirements of your collection service before ordering.

Boxes of 100 Sacks

We supply the 140-gauge Clear Recycled Content Sacks in boxes of 100 bags.

This quantity provides a convenient stock level for offices, retailers, cleaning teams, hospitality venues, schools, warehouses and other organisations.

Additionally, boxed storage keeps unused sacks together and helps protect them from dust and everyday handling.

Store opened boxes in a designated, clean and dry stock area. Furthermore, rotate supplies so that older stock is used first.

The sales unit is one complete box containing 100 sacks. Therefore, check the required number of boxes carefully before placing your order.

Why Choose Our Clear Recycled Content Sacks?

Our Clear Recycled Content Sacks combine partial content visibility, practical gusseted capacity and recycled polythene construction.

The translucent material helps users inspect and identify the contents. Meanwhile, the open-top design supports quick filling, and the gussets expand around soft or bulky waste.

The 450mm x 730mm x 975mm / approximately 17.7 x 28.7 x 38.4-inch size provides practical capacity for compatible bins and sack holders.

Additionally, the 140-gauge / approximately 35-micron thickness suits light to medium-duty general waste and recycling applications.

Furthermore, the name Clear Recycled Content Sacks provides a more accurate description than simply calling them clear sacks. The name acknowledges both the recycled material and the fact that the resulting film is not completely transparent.

With 100 sacks supplied in each box, organisations can maintain a convenient supply for regular cleaning, recycling and waste-management tasks.

What Are Clear Recycled Content Sacks Also Known As?

People may also refer to these sacks as:

• Clear recycled sacks
• Recycled-content refuse sacks
• Clear regran sacks
• Regranulated polythene sacks
• Translucent refuse sacks
• Semi-clear bin bags
• Recycled polythene sacks
• Clear recycling sacks
• Transparent recycling bags
• Cloudy clear sacks
• Clear waste sacks
• Clear bin liners
• Gusseted recycling sacks
• Commercial recycling bags
• Waste-separation sacks
• Visible-content sacks
• 140-gauge clear sacks
• 35-micron recycling sacks
• Recycled plastic refuse sacks
• Clear general-waste bags

Although people often use these terms interchangeably, sacks can differ in dimensions, clarity, recycled content, thickness, construction and carrying performance. Therefore, always check the complete product specification before ordering.

Food Contact Information for Clear Recycled Content Sacks

These sacks are intended for waste and recycling applications. Do not use them to store, wrap or transport unpackaged food.

Recycled or regranulated material does not automatically meet the requirements for direct food contact. Therefore, do not use the sacks as food-preparation surfaces or for applications involving direct contact with food.

Food businesses may use the sacks for appropriate back-of-house waste, provided they follow their hygiene, waste-separation and pest-control procedures.

If you require confirmation for a particular application or need supporting documentation, please email sales@expresspackaging.co.uk before ordering.

PPWR Compliance Information

Regulation (EU) 2025/40 on Packaging and Packaging Waste, commonly known as the PPWR, applies to packaging placed on the EU market.

We can provide available product specifications and supporting information to help customers complete their compliance assessments. However, recycled-content or regranulated polythene construction alone does not confirm full PPWR compliance.

The responsible economic operator must assess the product and its intended use against all applicable requirements, including packaging minimisation, substances of concern, recycled content, recyclability, labelling and technical documentation.

Customers intending to place these products on the EU market should email sales@expresspackaging.co.uk to request the latest available documentation and confirm suitability before making a recycled-content or PPWR compliance claim.

Material and Responsible Disposal

These sacks use flexible recycled or regranulated polythene.

However, sacks containing general waste are normally disposed of together with their contents through the appropriate waste stream rather than recycled.

Clean and unused polythene sacks may suit specialist flexible-plastic recycling services, depending on the facilities available in your area. Nevertheless, many household kerbside collections do not accept plastic bags or flexible films.

Contamination with food, liquid, chemicals or general refuse may prevent recycling. Therefore, always follow the guidance provided by your local authority, facilities manager or commercial waste contractor.

Where a sack remains clean and undamaged, consider reusing it before placing it into the appropriate recycling or waste stream.

Important Safety Information

Keep unused sacks away from babies and young children because the material can present a suffocation risk. Never use the sacks as toys, protective clothing or bedding.

Store unused sacks in a clean, dry place away from direct heat, naked flames and prolonged sunlight. Polythene can melt or burn when exposed to high temperatures. Additionally, never place hot ashes, embers or heated objects into the sacks.

Do not overload the sacks or fill them with waste that exceeds the strength of the material or seams. Similarly, protect the polythene from sharp corners, broken objects and abrasive surfaces.

Before lifting, check the sack for punctures, stretching or damage. If the contents are bulky or heavy, support the base or transfer the waste into a more suitable container.

Always follow your organisation’s manual-handling, hygiene and waste-disposal procedures.

Sample Requests

To request a sample, please email sales@expresspackaging.co.uk or call 0121 622 2347.

A small charge applies only to sample bags wider than 600mm. Our sales team will confirm any applicable charge before sending the sample.

Illustration Only

Bins, waste, recyclable materials, cleaning equipment and accessories shown in our product images demonstrate potential applications only and are not included with the sacks.

The appearance of the sacks may differ slightly from the product photographs because recycled and regranulated polythene can vary in colour and clarity.

Bins and waste containers also vary in width, depth, height and rim design. Therefore, measure your container carefully before ordering and allow sufficient material for the sack to expand, fold over the rim and close after filling.