Cam Buckle Lashing

• Cam Buckle Lashing 25mm x 3M provides adjustable restraint for suitable light loads
• Measures 25mm x 3m / approximately 0.98in x 9.84ft
• Cam buckle allows quick manual adjustment
• Listed load capacity of 125kg / approximately 276lb
• Listed break force of 250kg / approximately 551lb
• Suitable for securing appropriate light loads
• Adjustable strap accommodates differently sized suitable items
• Does not require a ratchet mechanism
• Quick to fit, tighten and release
• Compact design suits vehicles, workshops and storage areas
• Reusable for repeated suitable applications
• Useful for bundling, organising and temporary restraint
• Sold individually
• Available for delivery throughout mainland UK

Common Uses

• Securing suitable light loads
• Holding boxes together
• Organising items inside vans
• Vehicle boot organisation
• Securing suitable camping equipment
• Holding lightweight materials together
• Workshop storage
• Warehouse organisation
• Moving-house preparation
• Bundling suitable rolled materials
• Securing lightweight covers
• General transport preparation
• Garage organisation
• Holding suitable luggage
• Trade vehicle storage
• Temporary restraint of suitable items
• Securing lightweight equipment
• General household transportation
• Keeping suitable stored items together
• Replacing worn light-duty lashing straps

Cam Buckle Lashing 25mm x 3M

Our Cam Buckle Lashing 25mm x 3M provides a simple adjustable restraint for securing appropriate light loads during storage, organisation and transportation.

The lashing measures 25mm wide x 3m long, which equals approximately 0.98in x 9.84ft. Therefore, the strap provides enough length to pass around many suitable boxes, containers, bundles and lightweight items.

Its cam buckle allows users to feed the strap through the mechanism and pull it manually to the required tension. Consequently, users can adjust the lashing without operating a ratchet.

The product has a listed load capacity of 125kg, or approximately 276lb, and a listed break force of 250kg, or approximately 551lb.

However, users must assess the complete application before use. The condition of the strap, buckle, load, attachment method and surrounding environment can all affect performance.

Cam Buckle Lashing 25mm x 3M Specifications

Specification	Details
Product type	Light-duty cam buckle lashing
Keyphrase	Cam Buckle Lashing 25mm x 3M
Strap width	25mm / approximately 0.98in
Strap length	3m / approximately 9.84ft
Metric dimensions	25mm x 3m
Approximate imperial dimensions	0.98in x 9.84ft
Tensioning method	Manual cam buckle
Listed load capacity	125kg / approximately 276lb
Listed break force	250kg / approximately 551lb
Main purpose	Securing suitable light loads
Ratchet mechanism	No
Reusable	Yes – subject to condition and suitability
Material	Not specified
Colour	Blue
Hook fittings	Not specified
Applicable standard	Not specified
Stock code	915
Selling unit	One individual lashing
Delivery area	Mainland UK

Dimensions are nominal, while imperial conversions are approximate. Colour, buckle design, finish and appearance may vary according to current stock or manufacturing batch.

The listed load capacity and break force should not be confused. Users must not exceed the stated load capacity or rely on the break force as a normal working load.

Understanding the Load Capacity

The Cam Buckle Lashing 25mm x 3M has a listed load capacity of 125kg, or approximately 276lb.

This figure indicates the maximum stated load capacity rather than the amount of force users should automatically apply in every situation.

Actual performance can depend on:

• How the strap passes around the load
• The condition of the webbing
• Correct use of the buckle
• Load movement
• Sharp edges
• Temperature
• Moisture
• Chemical exposure
• Vibration during transit
• The strength of the item being secured
• The security of any attachment points

Users should remain below the stated capacity and apply an appropriate safety margin according to the application, risk assessment and relevant transport requirements.

For safety-critical or regulated applications, confirm that the product marking and supporting documentation meet the required standard before use.

Cam Buckle Lashing Break Force

The product has a listed break force of 250kg, or approximately 551lb.

Break force refers to the force at which the product may fail under particular test conditions. Therefore, it does not represent a safe normal working load.

Do not use the 250kg break force as permission to restrain a 250kg load. Instead, follow the listed load capacity of 125kg and assess the complete securing arrangement.

Sudden movement, impact and vibration can create forces greater than the static weight of an item. Consequently, a moving load may place significantly more strain on the lashing.

Where a load presents a serious risk, use appropriately certified equipment with clearly marked lashing capacity and supporting technical documentation.

Using the Cam Buckle Lashing 25mm x 3M

Before using the lashing:

1. Identify the weight and shape of the load.
2. Check that the load falls within the stated capacity.
3. Inspect the strap and buckle.
4. Position the item securely.
5. Protect the webbing from sharp edges.
6. Pass the strap around the suitable item or through the required arrangement.
7. Feed the loose end correctly through the cam buckle.
8. Pull the strap until it holds the item securely.
9. Check that the buckle grips the webbing.
10. Secure or contain the loose strap end.
11. Recheck the load before transportation.

Do not apply excessive tension. Although the lashing should hold the item securely, overtightening could crush boxes, damage equipment or place unnecessary strain on the strap.

Threading the Cam Buckle

Press the cam buckle to open the gripping mechanism. Next, feed the loose end of the webbing through the correct opening.

Pull the webbing through until the strap reaches the required length. Then release the buckle so the mechanism grips the strap.

Make sure the webbing lies flat inside the buckle. Twisted or folded webbing may not grip correctly and could experience uneven wear.

After tightening, pull firmly on the secured section to check that the buckle holds the webbing.

If the strap slips through the buckle, stop using it. Inspect the buckle and webbing before trying another suitable lashing.

Cam Buckle Lashing 25mm x 3M for Light Loads

This product is designed for securing suitable light loads.

Possible applications include holding boxes together, organising suitable equipment and reducing movement among lightweight items in storage or transit.

However, the words light load do not replace an appropriate weight and risk assessment. Users must consider the 125kg / approximately 276lb listed load capacity and the forces that may develop during movement.

The lashing may not suit tall, unstable or irregular loads even when their weight falls below the stated capacity.

Use additional restraints or a more appropriate load-securing system when one cam buckle strap cannot adequately control the item.

Cam Buckle Lashing 25mm x 3M for Boxes

The adjustable strap can pass around suitable boxes and containers to help keep them closed or grouped together.

Place the strap around the strongest suitable section of the box. Then tighten it gradually until it holds the package without crushing the board or damaging the contents.

For cardboard boxes, avoid placing excessive pressure across weak or unsupported panels. Additionally, use edge protectors where the strap could cut into the box.

A lashing strap does not replace suitable packaging tape, cushioning or an appropriately sized outer carton.

Cam Buckle Lashing 25mm x 3M for Vehicles

The lashing may help organise appropriate lightweight items inside vans, cars and other vehicles.

Before travelling, position items so they cannot roll, slide, tip or strike vehicle occupants. Next, apply the strap using a suitable arrangement.

Do not connect the lashing to weak trim, seat handles or fittings that were not designed as load-restraint points.

The product listing does not specify compliance with a particular road-transport or load-restraint standard. Therefore, use appropriately certified and rated equipment where regulations, workplace procedures or risk assessments require it.

Never allow the strap or loose end to interfere with the driver, pedals, steering, doors or other vehicle controls.

Choosing Suitable Attachment Points

A securing arrangement can only perform correctly when every attachment point remains stable.

Choose points that:

• Remain secure under the expected load
• Do not have sharp edges
• Cannot bend or detach
• Keep the strap correctly positioned
• Do not cut or crush the webbing
• Suit the item being restrained
• Allow the strap to lie flat
• Remain accessible for controlled release

Do not attach the lashing to damaged rails, temporary fittings, weak handles or unsupported panels.

Where no suitable attachment point exists, consider passing the strap completely around the item or selecting another securing method.

Protecting the Cam Buckle Lashing from Sharp Edges

Sharp and abrasive edges can damage the webbing.

Before tightening the lashing, identify metal corners, rough timber, protruding fittings and other abrasive surfaces. Then reposition the strap or use suitable edge protection.

Do not allow the strap to rub repeatedly against an unprotected corner during transportation. Vibration can gradually weaken the webbing even when the initial damage appears minor.

Replace the lashing if the strap develops cuts, heavy abrasion or exposed internal fibres.

Inspecting the Cam Buckle Lashing 25mm x 3M

Inspect the complete lashing before every use.

Look for:

• Cuts
• Frayed webbing
• Broken stitching
• Heat damage
• Chemical damage
• Heavy abrasion
• Permanent stretching
• Cracks in the buckle
• Bent buckle components
• Corrosion
• Sharp buckle edges
• A jammed mechanism
• Webbing that slips through the buckle
• Missing or unreadable product markings

Do not use a damaged lashing. Instead, remove it from service and replace it with an appropriate product.

A strap may also require replacement after experiencing a sudden impact or uncontrolled load movement, even when damage does not appear immediately obvious.

Tightening the Cam Buckle Lashing

Pull the loose end of the strap by hand to apply tension.

The cam buckle does not provide the same mechanical tightening action as a ratchet. Consequently, it suits appropriate light-duty applications where manual tension provides sufficient restraint.

Do not use tools, levers or extensions to increase the tension. These methods may damage the buckle, overload the strap or crush the secured item.

Stop tightening once the load remains stable and the buckle grips the strap securely.

Releasing the Cam Buckle Lashing 25mm x 3M

Before releasing the strap, make sure the load cannot fall, roll, slide or move unexpectedly.

Support unstable items where necessary. Then hold the loose end and press the cam buckle carefully to release its grip.

Reduce the tension gradually rather than pulling the strap free suddenly.

Keep hands away from pinch points around the buckle. Additionally, do not stand below, downhill from or directly in front of an item that could move when the restraint releases.

Using More Than One Cam Buckle Lashing

Some items may require more than one strap to prevent movement in different directions.

When using several lashings, position them so they share the load appropriately. However, do not assume that combining two straps automatically doubles the safe load capacity.

The effectiveness of the arrangement depends on the angles, attachment points, friction, item shape and direction of movement.

All straps should remain in good condition and suit the application. Furthermore, check each buckle separately after tightening.

Important Safety Limitations

Do not use the lashing for:

• Lifting loads
• Suspending loads overhead
• Towing vehicles
• Vehicle recovery
• Climbing
• Fall protection
• Supporting people
• Personal restraint
• Securing animals
• Playground equipment
• Electrical insulation
• Heat or flame protection
• Restraining hazardous loads without an appropriate assessment
• Applications above the stated load capacity
• Applications requiring certification that has not been confirmed
• Applications where failure could cause serious injury

The strap provides general-purpose light-load restraint. It does not replace certified lifting slings, recovery straps, safety harnesses or heavy-duty ratchet lashings.

Cleaning the Cam Buckle Lashing 25mm x 3M

Remove loose dirt with a dry cloth or soft brush.

Where necessary, wipe the strap with a lightly dampened cloth. Then allow it to dry naturally before storage or reuse.

Do not use bleach, strong solvents or harsh chemicals because they may weaken the webbing or affect the buckle.

Avoid soaking the buckle. Additionally, keep the complete lashing away from direct heat, open flames and hot equipment.

Never use a heated appliance to dry the strap.

Storing the Cam Buckle Lashing 25mm x 3M

Store the lashing in a clean and dry location away from direct sunlight, moisture, excessive heat and chemicals.

Release all tension before storage. Then coil the strap loosely without tying tight knots.

Keep the lashing away from sharp tools, rough surfaces and machinery. Furthermore, protect the buckle from impact or crushing.

Inspect the strap after prolonged storage and before returning it to use.

Also Known As

Customers may also describe this product as:

• Cam buckle strap
• Light-duty lashing strap
• 25mm lashing strap
• 3m cam buckle strap
• Adjustable tie-down strap
• Manual lashing strap
• Cam strap
• Cargo securing strap
• Box restraint strap
• Light-load securing strap
• Webbing tie-down
• Cam buckle tie
• Reusable lashing strap
• Adjustable webbing strap
• 25mm x 3m tie-down strap

These names may describe products with different lengths, widths, capacities and buckle designs. Therefore, check the complete specification before ordering.

Food Safety Information

We have not confirmed this lashing as suitable for direct food contact.

Therefore, do not allow the strap or buckle to touch exposed food. When securing food products, keep the contents inside suitable, sealed food-contact packaging.

A lashing used in vehicles, warehouses or workshops should remain separate from food-preparation surfaces and equipment.

PPWR Compliance Information

The EU Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, establishes requirements for packaging placed on the EU market. Further information appears in the European Commission’s packaging guidance.

The reusable lashing functions as load-securing equipment rather than disposable packaging. However, businesses supplying it into the EU should assess any outer packaging and additional packaging materials.

This description does not constitute a declaration of PPWR compliance. Please contact us if you require available product or packaging information for a particular application.

Sample Requests

We may provide a sample lashing where available so you can assess the dimensions, cam buckle and general construction before placing a larger order.

A sample does not confirm suitability for a particular load, regulated transport application or safety-critical use.

To discuss availability, please contact us:

• Email: sales@expresspackaging.co.uk
• Telephone: 0121 622 2347

Cam Buckle Lashing 25mm x 3M Delivery

We can deliver the Cam Buckle Lashing 25mm x 3M throughout mainland UK.

Each lashing is sold individually and measures 25mm x 3m, or approximately 0.98in x 9.84ft. It has a listed load capacity of 125kg / approximately 276lb and a listed break force of 250kg / approximately 551lb.

Please contact us if you require further product information before ordering.

Cam Buckle Lashing 25mm x 3M Illustration Only

Product photographs are for illustration purposes. Boxes, vehicles, equipment and other accessories are not included unless the product listing states otherwise.

The strap colour, buckle finish, packaging and general appearance may vary according to current stock or manufacturing batch. Additionally, photography, lighting and screen settings can affect the appearance shown online.

The dimensions, stated load capacity and stated break force in the written specification should guide your purchase.