Aluminium Foil Tape
£11.94£9.95 (roll)
- 50mm x 10m / 2″ x 32.8ft width x length
- Strong, durable repair tape
- Suitable for indoor and outdoor use
- Designed to provide a secure, reliable hold
- Ideal for repairs, maintenance, sealing and general-purpose applications
Features & Benefits
- Aluminium Foil Tape 30 Micron 48mm x 45m for compatible joining, sealing and patching applications
- 30 micron aluminium foil backing
- 48mm x 45m – approximately 1.89 inches x 147.64 feet
- Silver metallic finish
- Cut to length for individual jobs
- Useful for compatible foil-faced insulation and maintenance tasks
- Convenient roll format for workshop and trade supplies
- Available for UK mainland delivery
Common Uses
Subject to the supplied product specification and surface compatibility, potential applications include:
- Joining compatible foil-faced insulation
- Covering seams in foil-faced materials
- Patching small tears in compatible foil facings
- Suitable ductwork and ventilation sealing tasks
- General workshop maintenance
- Joining and finishing compatible metallic surfaces
Aluminium foil tapes are commonly used for sealing, bonding and fixing, including HVAC applications. However, suitability depends on the particular tape and installation requirements. Foil-tape application guidance.
Aluminium Foil Tape 30 Micron 48mm x 45m
Keep a practical joining and repair material ready with Aluminium Foil Tape 30 Micron 48mm x 45m. Its aluminium foil backing provides a metallic finish, while the roll format allows you to cut strips to suit each application.
The 48mm width offers a manageable strip for covering suitable seams and small damaged areas. Meanwhile, the 45m length provides tape for multiple tasks without needing to cut every strip to the same size.
For compatible foil-faced materials, Aluminium Foil Tape 30 Micron 48mm x 45m can help create a tidy finish across joints and patches. In addition, its silver appearance complements aluminium foil surfaces.
Choose the tape according to the material, working conditions and requirements of the installation. Then prepare the surface carefully before application.
Aluminium Foil Tape 30 Micron 48mm x 45m Dimensions and Specifications
| Specification | Details |
|---|---|
| Product type | Aluminium foil tape |
| Backing material | Aluminium foil |
| Nominal foil thickness | 30 micron / 0.03mm |
| Approximate imperial foil thickness | 0.00118 inches / 1.18 mil |
| Tape width | 48mm / approximately 1.89 inches |
| Roll length | 45m / approximately 147.64 feet |
| Metric dimensions | 48mm x 45m |
| Approximate imperial dimensions | 1.89 inches x 147.64 feet |
| Dimension order | Tape width x roll length |
| Finish | Silver metallic |
| Format | Roll |
| Intended applications | Compatible joining, sealing and patching tasks |
The 30 micron measurement refers to the aluminium foil backing. Therefore, it should not be treated as the total thickness of the tape, adhesive and any release liner combined.
Similarly, the roll dimensions describe the tape width and available length. Allow additional material for overlaps and finishing when calculating how much a job requires.
Aluminium Foil Tape 30 Micron for Joining and Finishing
Aluminium Foil Tape 30 Micron 48mm x 45m provides a convenient strip format for joining compatible foil-faced materials.
Before covering a seam, bring the adjoining materials into their intended position. Then apply the tape so it overlaps onto sound material on both sides of the joint.
For a neat finish, work in manageable lengths and press the tape down evenly. In addition, smooth out wrinkles as you go to improve contact with the surface.
Where an insulation or ventilation system specifies a particular tape, check that the supplied product meets those requirements before use.
Aluminium Foil Tape 30 Micron for Patching
Small tears in compatible foil facings may be suitable for patching with Aluminium Foil Tape 30 Micron 48mm x 45m.
First, inspect the damaged area and the surrounding material. If the surface is loose, brittle or extensively damaged, assess whether a larger repair or replacement is needed.
Next, cut a strip that extends beyond the damage onto a clean, sound bonding area. Then position the patch carefully and press it firmly into place.
A surface patch does not restore damaged insulation beneath the facing. Therefore, assess the condition of the complete material as well as its outer layer.
Choosing Aluminium Foil Tape 30 Micron 48mm x 45m
Start by identifying the surface you intend to join or repair. Then consider whether it is smooth, textured, coated or contaminated, as these factors can affect adhesion.
Aluminium Foil Tape 30 Micron 48mm x 45m should be selected against the needs of the application. For example, a general finishing task may have different requirements from an insulation or ductwork installation.
For unfamiliar materials, test a small, inconspicuous area before completing the job. This helps you assess adhesion and appearance.
Temperature limits, adhesive type, outdoor durability and specialist approvals should be checked against the supplied product information. These properties cannot be established from foil thickness and roll dimensions alone.
Preparing Surfaces for Aluminium Foil Tape 30 Micron
Careful preparation helps Aluminium Foil Tape 30 Micron 48mm x 45m make good contact with the surface.
First, remove loose dust, dirt and debris. Where necessary, clean the area using a method compatible with the material and its finish.
Next, allow the surface to dry before application, following the supplied instructions. In addition, remove grease or other contamination that could interfere with bonding.
Check that the surrounding material is firmly attached. Otherwise, the tape may bond to a layer that subsequently lifts away.
Finally, position the materials before applying the tape so the finished joint is not placed under unnecessary tension.
How to Apply Aluminium Foil Tape 30 Micron 48mm x 45m
Measure the seam or repair area before cutting Aluminium Foil Tape 30 Micron 48mm x 45m to length. Then allow sufficient overlap onto the surrounding material.
If the supplied tape has a release liner, peel it away gradually while positioning the strip. This helps you control placement and keep the adhesive surface clean.
Press the tape down evenly, working along the strip to reduce wrinkles and trapped air. In addition, pay attention to the edges so they make firm contact.
Avoid stretching the tape across unsupported gaps. Instead, follow the installation instructions for the materials being joined.
Finally, inspect the finished application and observe any specified bonding time before putting it into service.
Aluminium Foil Tape 30 Micron for Workshop and Trade Supplies
Aluminium Foil Tape 30 Micron 48mm x 45m is a useful addition to an organised maintenance kit.
Its roll format allows users to cut individual strips as required. Consequently, it can be kept alongside scissors, measuring tools and other suitable joining materials.
For repeated tasks, prepare the working area before starting. In addition, keep the tape accessible while protecting it from dust and dirt.
We supply Aluminium Foil Tape 30 Micron 48mm x 45m for delivery to UK mainland addresses. Please contact us if you need further product information before ordering.
Storing Aluminium Foil Tape 30 Micron 48mm x 45m
Store Aluminium Foil Tape 30 Micron 48mm x 45m in a clean, dry location, following the manufacturer’s guidance.
Protect the roll edges from contamination and physical damage. In addition, retain the original packaging where practical so the product instructions remain available.
Before use, check that the tape is in suitable condition. Then return the unused roll to its storage area ready for the next task.
Alternative Names
Customers may also search for:
- Aluminium foil tape
- Aluminum foil tape
- Silver foil tape
- Foil joining tape
- Foil insulation tape
- Foil patching tape
- HVAC foil tape
These terms cover products with different specifications. Therefore, compare the backing thickness, adhesive performance and application requirements before choosing.
Food Safety Information
Direct food-contact suitability has not been confirmed for this product. Therefore, do not assume that an adhesive foil tape is suitable for food contact simply because its backing is aluminium.
Keep the tape away from exposed food and food-contact surfaces unless appropriate manufacturer confirmation is available.
PPWR Compliance Information
The EU Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, establishes requirements for packaging placed on the EU market. Further information is available in the European Commission’s packaging guidance.
If this tape is used as part of packaging, assess its role within the complete packaging arrangement. In addition, consider the requirements relevant to the materials and intended use.
This description does not constitute a declaration of PPWR compliance. Please contact us for available product information if you need to assess a packaging application.
Sample Requests
A small sample patch can help you assess adhesion and appearance on your intended surface before placing a larger order.
For roll products, samples are supplied as small patches where available. Please contact us to discuss your requirements:
- Email: sales@expresspackaging.co.uk
- Telephone: 0121 622 2347
Tell us the material you intend to join or repair. In addition, let us know about the working conditions and any specific installation requirements.
Illustration Only
Product photographs are for illustration purposes. Tools, insulation, ductwork and other accessories are not included unless stated in the listing.
Packaging and appearance may vary. In addition, photography and screen settings can affect how the metallic finish appears.
Dimensions are nominal, and imperial conversions are approximate. Always follow the supplied product and application instructions.
Additional information
| Weight | 0.4 kg |
|---|
